Our Flood Protection Liquid starts out as a liquid. It seeps into gaps, cracks and openings and dries to a strong, flexible, rubberized, watertight coating. It seals out water, while remaining flexible. Flood Liquid should be used primarily as a final layer of protection to help seal any small pinholes or openings that may have been missed. Brush a generous amount directly on top of our other Flood Protection products. When applying Flood Liquid, make sure each coat is wider and overlaps previous layers of our Flood Protection products.

• Flood Protection Liquid can be brushed, rolled, or poured directly onto the surface, or on top of our other Flood Protection products.
• Use as a final coat of protection to help seal any small pinholes or openings that may have been missed.
• Penetrates deep into gaps, cracks, and openings.
• Once floodwaters recede, our Flood Protection Liquid can be easily removed.
• UL Verified - No water penetration through 1/8" gaps at depths up to 3 feet, for 14 days.

DRY TIME Depending on temperature, humidity and thickness of coating, Flood liquid will dry to the touch in approximately 3 to 6 hours, and fully cure in approximately 24-48 hours. Allow product to fully cure before floodwaters arrive. Flood Liquid begins to cure when exposed to the air. Always keep lid on tight during and after use. Remove any dried material and always use fresh liquid to seal an opening. COVERAGE The coverage for one coat of the 10oz Flood Liquid, when applied 2" wide, is approximately 20 linear feet. The coverage for one coat of the 28oz container of Flood Liquid, when applied 2" inches wide, is approximately 56 linear feet. The coverage for one coat of the 122oz Flood Liquid, when applied 2" inches wide, is approximately 244 linear feet. The coverage for one coat of the 320 oz flood liquid, when applied 2" inches wide, is approximately 590 linear feet. IMPORTANT INFORMATION Always follow local warnings regarding evacuations. Depending on the age and type of construction, there may be areas that cannot be seen or sealed. Unsealed porous surfaces, such as concrete, can seep water during extended underwater exposure. Our Flood Protection products are NOT intended for flash floods, extreme winds or water pressure, to protect against flying or floating debris, or if there is structural damage to the building. ADDITIONAL INFO All of our Flood Protection Products are Patent Pending for both products and uses.