The California Air Tools 60 Gal. 3.7 HP Continuous Run Air Compressor is designed for continuous running up to 8 hours at 90 PSI. The CALAIR air compressor has a pump system that is designed to have a life cycle before maintenance/service of 5,000 to 10,000 hours of usage. The large 60 gal. ASME certified steel air tank is just the right size for a shop, warehouse or factory. It's ideal for air brushing, bolting, brad nailing, cutting, drilling, grinding, finish nailing, framing nailing, HVLP painting, hobby nailing, hobby painting, inflation, roof nailing, spraying, stapling, trim and impacting/wrenching. It's designed for people looking for reliable air flow in commercial and semi-rugged environments. This air compressor comes backed by a 1-year limited warranty for purchasing assurance.

• 3.7 HP motor with reset switch
• Belt-driven pump (Oil type ISO 68 / LDAB68); 5,000-to-10,000-hour life; single-stage pump (2 cylinders)
• Equipped with a pressure gauge
• 1/2 in. NPT output valve port
• Power on/pressure switch
• Motor thermal overload protector (Trips at135C)
• Working pressure; 125-155 PSI
• 208V (200V-216V) to 230V (220V-240V)/60 Hertz/Single-Phase
• 11.5 CFM at 90 PSI; 13.6 CFM at 40 PSI
• Continuous run up to 8 hours (10 hours maximum)
• Backed by a 1-year limited warranty
• 16.7A draw
• Power requirements: Dedicated 20A outlet
• Plug type: NEMA 6-15P Receptacle: NEMA 6-15R or 6-20R
• Maximum operating (ambient) temperatures: 36 deg. to 108 deg. F
• Time to fill tank from empty to full (155 PSI); 6 minutes and 52 seconds
• Recovery time from 125 PSI to 155 PSI; 1 minute and 37 seconds
• 60 gal. ASME certified steel air tank
• Maximum tank pressure: 180 PSI