Cim-Tek Filtration 1 in. - 12 Thread Hydrosorb Filter Kit for Aboveground Tanks and Transfer Tanks
$54.99
$49.99
Save $2.5 (5%)
Cim-Tek Filtration 1 in. - 12 Thread Hydrosorb Filter Kit for Aboveground Tanks and Transfer Tanks
Cim-Tek Filtration 1 in. - 12 Thread Hydrosorb Filter Kit for Aboveground Tanks and Transfer Tanks
Item # 18957999
Get everything you need
Neighbor’s Club Members earn points with purchases.
Cim-Tek Filtration 1 in. - 12 Thread Hydrosorb Filter Kit for Aboveground Tanks and Transfer Tanks
Item # 18957999
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Cim-Tek Filtration Hydrosorb Filter Kit detects excess water and removes particulate, such as dirt, dust and rust. This fuel filter is used with gasoline, diesel, biodiesel blends up to B20, and ultra-low sulfur diesel. The filter features 10 micron hydrosorb media. Filters are necessary for keeping dirt, dust and rust out of your engine, protecting your engine for years to come. The kit contains a 72059 fuel filter and 52002 adaptor.
- Kit contains: 72059 filter and 52002 adaptor
- Detect water and particulate removal filter
- 10 micron hydrosorb media
- up to 25 GPM
- 50 PSI maximum working pressure
- Dimensions: 3-3/4 in. W x 5-1/2 in. (1 in. - 12 Thread)
- 1 year limited warranty
- This fuel filter kit is for use with above ground tanks and transfer tanks
| Brand | Cim-Tek Filtration |
|---|---|
| Country of Origin | Made in USA |
| Filtration Material | Layered media |
| Installation Method | 0 N/A |
| Longevity | 25PSID or annually |
| Make/Model Compatibility | 72059 Filter and 5002 Adaptor |
| Microns | 10 Microns |
| Product Height | 4.25 in. |
| Product Length | 8.75 in. |
| Product Weight | 3.5 lb. |
| Product Width | 4.25 in. |
| Shape | Rectangular |
| Thread Size | 1 in. - 12 |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | 92059 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 6 of 6 Questions
Newest questions
Q: Not what I was asking. I need to know will the fuel travel through the filter on a gravity feed system or will it require a pump to push the fuel through the filter
2 years ago1 Answer
- A: Per the specification sheet: Designed for fuel dispensers & fueling pumps That specification sheet is located here: https://www.cim-tek.com/images/products/yard_farm/PDFs/92059.pdf This filter is designed to work with specific Hydrosorb filters only. To see if your Hydrosorb filter uses this kit Please reach out to Cim-Tek Filtration at:844-447-7663 for additional information2 years agoHelpful?
Q: Can this filter be used with a gravity feed system on my truck
2 years ago1 Answer
- A: Per the product description: "This fuel filter kit is for use with above ground tanks and transfer tanks"2 years agoHelpful?
Q: What is the pressure drop curve look like ? For example at 1 gallon per minute of gasoline the pressure drop would be —/
2 years ago1 Answer
- A: Here is the full specification sheet from the manufacturer: https://www.cim-tek.com/images/products/yard_farm/PDFs/92059.pdf Please reach out to Cim-Tek Filtration at 844-447-7663 for additional information2 years agoHelpful?
Q: How often do these need to be replaced?
7 years ago1 Answer
- A: MONITORING THE FILTER: Inspect filter every six months. If flow slows to less than 3 GPM or differential pressure reaches 20-25 psid, change filter. If functioning properly, change annually. Failure to replace filter could cause internal filter rupture, resulting in contamination downstream. FOR HYDROSORB, HYDROGLASS, AND MULTI-FUEL FILTERS: If you suspect water contamination, remove the filter and pour the contents into a jar. If fuel is cloudy or water separates at the bottom of the jar, the filter is likely plugged with water. If water is excessive in the jar, it may be necessary to have the tank cleaned or drained prior to further use.7 years agoHelpful?
Q: Can this kit be used on a barrel pump?
7 years ago1 Answer
- A: Yes it can.7 years agoHelpful?
Q: What size is input and output fitting?
7 years ago1 Answer
- A: It is 3/4".7 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 6 of 6 Questions
Newest questions
Q: Not what I was asking. I need to know will the fuel travel through the filter on a gravity feed system or will it require a pump to push the fuel through the filter
2 years ago1 Answer
- A: Per the specification sheet: Designed for fuel dispensers & fueling pumps That specification sheet is located here: https://www.cim-tek.com/images/products/yard_farm/PDFs/92059.pdf This filter is designed to work with specific Hydrosorb filters only. To see if your Hydrosorb filter uses this kit Please reach out to Cim-Tek Filtration at:844-447-7663 for additional information2 years agoHelpful?
Q: Can this filter be used with a gravity feed system on my truck
2 years ago1 Answer
- A: Per the product description: "This fuel filter kit is for use with above ground tanks and transfer tanks"2 years agoHelpful?
Q: What is the pressure drop curve look like ? For example at 1 gallon per minute of gasoline the pressure drop would be —/
2 years ago1 Answer
- A: Here is the full specification sheet from the manufacturer: https://www.cim-tek.com/images/products/yard_farm/PDFs/92059.pdf Please reach out to Cim-Tek Filtration at 844-447-7663 for additional information2 years agoHelpful?
Q: How often do these need to be replaced?
7 years ago1 Answer
- A: MONITORING THE FILTER: Inspect filter every six months. If flow slows to less than 3 GPM or differential pressure reaches 20-25 psid, change filter. If functioning properly, change annually. Failure to replace filter could cause internal filter rupture, resulting in contamination downstream. FOR HYDROSORB, HYDROGLASS, AND MULTI-FUEL FILTERS: If you suspect water contamination, remove the filter and pour the contents into a jar. If fuel is cloudy or water separates at the bottom of the jar, the filter is likely plugged with water. If water is excessive in the jar, it may be necessary to have the tank cleaned or drained prior to further use.7 years agoHelpful?
Q: Can this kit be used on a barrel pump?
7 years ago1 Answer
- A: Yes it can.7 years agoHelpful?
Q: What size is input and output fitting?
7 years ago1 Answer
- A: It is 3/4".7 years agoHelpful?
Similar Items
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
-
-
Items You May Like
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Customers Also Bought
-
Top Rated
-
Top Rated
-
-
-
-
-
-
-
Top Rated
-
-
-
Reviews
- customer service
- for steel
1 to 2 of 6 Reviews .
1 – 2 of 6 Reviews
Most Recent
Clifton, tx
Review 1
4 out of 5 stars.
Great
7 years ago
Great products and great customer service, highly recommend!
Yes, I recommend this product.
New York
Reviews 2
5 out of 5 stars.
Great inline Filter
7 years ago
Build with tough steel parts and perfect for the Job.
Yes, I recommend this product.