DuraVent DuraPlus 8 in. Diameter Chimney Cap
DuraVent DuraPlus 8 in. Diameter Chimney Cap
Item # 185429799
$199.99
or
or
Get everything you need
Neighbor’s Club Members earn points with purchases.
$199.99
or
or
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
A DuraPlus 8 in. Diameter Chimney Cap is required where chimney pipe terminates above the roof line. Removable screws built into the chimney cap allow for cleaning of the chimney and spark arrestor screen. Made of stainless steel, this cap is built to last and to clean up easily. Designed for normal, continuous operation at 1,000°F flue gas temperatures, this stainless-steel chimney cap is a go-to for a reason!
- Designed to stay cool on the outside, to provide a hot draft on the inside, to boost stove efficiency, and to provide for a fire-safe design that protects both the chimney and the building
- Features two insulating layers (refractory blanket, plus air space)
- Refractory insulation is held securely in position, eliminating hot spots common with loose-fill type insulations
- Designed for normal, continuous operation at 1,000°F flue gas temperatures
- Stainless-steel chimney cap required where chimney pipe terminates above the roof line
- Removable screws allow for cleaning of the chimney and spark arrestor screen
- Made of stainless steel for a super durable chimney cap
- Subjected to rigorous and stringent HT requirements of the UL standard, including one hour at 1,400°F, plus three ten minute chimney fire tests at 2,100°F
| Brand | DuraVent |
|---|---|
| Country of Origin | Made in USA |
| Burner System | N/A |
| Cabinet or Housing Material | Stainless steel |
| Coverage Area | 0 N/A |
| Features | 0N/A |
| Finish | Galvanized |
| Fuel Flow Rate | 0 N/A |
| Fuel Type | None |
| Heater Control | None |
| Heating Unit Type | N/A |
| Ignition Type | None |
| Indoor/Outdoor | Outdoor |
| Intended Use Grade | Standard |
| Maximum BTU Heat Output | N/A |
| Mounting Location | Other |
| Number Of Heat Settings | N/A |
| Primary Material | Stainless Steel |
| Product Height | 8 in. |
| Product Length | 15 in. |
| Product Weight | 5 lb. |
| Product Width | 15 in. |
| Run Time | 0N/A |
| Warranty | Limited Lifetime |
| Manufacturer Part Number | 8DP-VC |
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Newest questions
Q: What is the o.d. for the outer pipe?
6 months ago1 Answer
- A: Hi Neighbor! The outside dimension is 14 IN.6 months agoHelpful?
Q: What is the interior diameter of the cap?
8 months ago1 Answer
- A: Hi Neighbor! This product has an 8-inch interior diameter.8 months agoHelpful?
Q: My question was not answered - let me ask it another way. What is the size of each hole in the screen? Are they 3/4 inch or 5/8 inch?
11 months ago1 Answer
- A: Hello Neighbor, Per our vendor, "The openings in the Spark Arrestor Screen comply with all known Codes. It is a ½ X ½ inch metal screen used within the DuraPlus 6” & 8DP-VC Chimney Cap. The openings are slightly less than the ½” min required by Code. We even comply with the stricter California wildfire codes. We are also UL listed for compliance to code."11 months agoHelpful?
Q: What is the mesh size of the screen and is it measured side to side/up/down or diagonal?
11 months ago1 Answer
- A: Hello Neighbor, The mesh screen is approximately 4-3/4" tall.11 months agoHelpful?
Q: What is the diameter of the bottom ring 8DP-VP?
a year ago1 Answer
- A: Hi Neighbor! 8 in. Diametera year agoHelpful?
Q: Will it fit on 8" ss triple wall pipe?
2 years ago1 Answer
- A: Please contact the manufacturer at https://duravent.com/contact-us/technical-support/ techsupport@duravent.com 800-835-44292 years agoHelpful?
Q: Do you or can you get a 10 inch round one of this product
3 years ago1 Answer
- A: For special orders, please contact customer service.3 years agoHelpful?
Q&As
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Newest questions
Q: What is the o.d. for the outer pipe?
6 months ago1 Answer
- A: Hi Neighbor! The outside dimension is 14 IN.6 months agoHelpful?
Q: What is the interior diameter of the cap?
8 months ago1 Answer
- A: Hi Neighbor! This product has an 8-inch interior diameter.8 months agoHelpful?
Q: My question was not answered - let me ask it another way. What is the size of each hole in the screen? Are they 3/4 inch or 5/8 inch?
11 months ago1 Answer
- A: Hello Neighbor, Per our vendor, "The openings in the Spark Arrestor Screen comply with all known Codes. It is a ½ X ½ inch metal screen used within the DuraPlus 6” & 8DP-VC Chimney Cap. The openings are slightly less than the ½” min required by Code. We even comply with the stricter California wildfire codes. We are also UL listed for compliance to code."11 months agoHelpful?
Q: What is the mesh size of the screen and is it measured side to side/up/down or diagonal?
11 months ago1 Answer
- A: Hello Neighbor, The mesh screen is approximately 4-3/4" tall.11 months agoHelpful?
Q: What is the diameter of the bottom ring 8DP-VP?
a year ago1 Answer
- A: Hi Neighbor! 8 in. Diametera year agoHelpful?
Q: Will it fit on 8" ss triple wall pipe?
2 years ago1 Answer
- A: Please contact the manufacturer at https://duravent.com/contact-us/technical-support/ techsupport@duravent.com 800-835-44292 years agoHelpful?
Q: Do you or can you get a 10 inch round one of this product
3 years ago1 Answer
- A: For special orders, please contact customer service.3 years agoHelpful?
Similar Items
-
Top Rated
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
-
Items You May Like
-
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
Top Rated
-
Customers Also Bought
-
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
-
Top Rated
Reviews
1 to 0 of 2 Reviews .