A great benchtop metal lathe for turning tools and parts. The G0752 10" x 22" Variable-Speed Lathe should be a welcomed addition to your garage or workshop.

The variable-speed spindle control with a digital RPM readout on the headstock allows you to dial in the exact spindle speed you need between 100-2000 RPM with the turn of a dial.

A Delta variable-frequency driver inverter (VFD) ensures smooth, consistent torque at every speed from the 1 HP 3-phase motor without requiring a 3-phase power.

The VFD saves you money by increasing the efficiency of the motor and decreasing electricity use, reducing wear and tear on the motor.

The beds are constructed have been precision-ground and hardened in the traditional three-V prismatic design.

The carriage has power feed capability when it is engaged with the lead screw.

The spindle has an MT#4 taper and 25mm bore. The tailstock quill offers 2-1/2" of travel and has a MT#3 taper.

The optional T27838 or T27839 Cabinet Stands allow for a more organized and stable base for turning operations.

The G0752 manual was written by our U.S.-based Documentation Department and is packed with useful information.

• Motor: 1 HP, 110V, 3-phase (with inverter for single-phase power supply), 12A
• Required power supply: 110V, single-phase, min. 12A circuit
• Swing over bed: 9-1/2"
• Swing over cross slide: 6-1/8"
• Swing over saddle: 6-1/8"
• Distance between centers: 22"
• Bed width: 6-1/8"
• Spindle speed: Variable, 100-2000 RPM
• Spindle type: Threaded, 1-3/4"
• Tailstock taper: MT#3
• Tailstock quill travel: 2-1/2"
• Cross slide travel: 6-1/2"
• Compound travel: 3-1/2"
• Maximum tool bit size: 1/2"
• Leadscrew: 3/4" x 12 TPI
• Longitudinal feeds: (9) 0.0025, 0.0140 in./rev.
• Inch thread range: (31) 8-72 TPI
• Metric thread range: (26) 0.25-3.50mm
• Overall dimensions: 50-1/2" W x 22" D x 19-5/8" H
• Approximate shipping weight: 453 lbs.

• Variable-speed spindle control with digital RPM readout
• Spindle reversing switch
• Emergency stop button
• Quick-locking tailstock
• Chip tray and backsplash guard
• 1-year limited warranty

• 5" Three-jaw scroll chuck with two sets of jaws
• 6-1/2" Four-jaw independent chuck with reversible jaws
• 8" Faceplate
• 4-Way turret tool post
• MT#3 and MT#4 dead center
• Follow and steady rests